el series ? ratings of 5a and 10a @ 3-100 vdc ? ul recognized, ce and rohs compliant ? 5, 12 and 24vdc control ? mosfet output product selection control voltage 5a 10a 4-8 vdc el100d5-05 el100d10-05 10-14 vdc el100d5-12 el100d10-12 21-27 vdc el100d5-24 EL100D10-24 output specifications (1)(3) description 5a 10a operating voltage range [vdc] 3-100 3-100 maximum load current [adc] (2) 5 10 minimum load current [madc] 150 150 transient overvoltage [vpk] 600 600 maximum surge current non-repetitive (10ms) [a] 115/120 145/150 maximum i2 t for fusing (50/60hz, 1/2 cycle) [a2 sec] 65/60 100/95 maximum off-state leakage current @ rated voltage [adc] 100 100 maximum on-state resistance @ rated current (rds-on) 0.04 ohm 0.01 ohm maximum on-state voltage drop @ rated current 0.2v 0.1v input specifications (1) description el100dxx-05 el100dxx-12 el100dxx-24 control voltage range 4-8 vdc 10-14 vdc 21-27 vdc minimum turn-on voltage 4.0 vdc 10 vdc 21 vdc minimum turn-off voltage 0.5 vdc 1.0 vdc 2 vdc typical input current @ nominal turn-on voltage 13.3 ma 11.7 ma 11.5 ma nominal input impedance [ohms] 300 940 2k maximum turn-on time [msec] 1 1 1 maximum turn-off time [sec] 300 300 300 general specifications description parameters dielectric strength, input to output 2500 vrms dielectric strength, output to baseplate 2500 vrms ambient operating temperature range -30 to 80 c ambient storage temperature range -30 to 125 c weight (typical) 0.5 oz (14.4g) terminals 3/16" input, 1/4" output qc general notes 1) all parameters at 25c unless otherwise specified. 2) when mounted to the proper size heat sink (see derating curves) 3) inductive loads should be diode suppressed to prevent damage to the relay.
wiring diagram mechanical specifications
thermal derate information agency approvals rev. 111810
annex - enviromental information
|